• Plank

    Hot-dip galvanized steel. Mounted on top of the Transoms/Ledgers and secured with locks against lift-off.


  • Bracket

    Hot-dip galvanized steel. Mounted on the rosette using the integrated wedge coupler. Used to widen the scaffold. Intended for decks with up tube.


  • Ledger Reinforced

    Normally mounted in smaller holes of Rosette, assure a right angle structure. Reinforced with extra pipe for heavier load.

  • Base Collar

    Placed on top of Base Jacks and allows Ledgers Braces assembled near the ground.

  • Brace

    Mounted in the holes of the rosette using the wedge couplers and has a bracing effect on the scaffold. Diagonal braces should be placed on at least every five section starting with the outer ones.


  • Ledger

    Normally mounted in smaller holes of Rosette, assure a right angle structure, also serves as Guardrail.


  • VERTICAL STANDARD

    Welded with Rosette in which Ledgers, Braces, Transoms are to be mounted in eight directions. Distance between Rosettes is 500mm.

RINGLOCK SYSTEM

Ringlock Scaffolding System is wildly used in North and South America as well as Europe. The products are made from OD48.3x3.25mm Scaffold Tube in Q235 or Q345 Steel Grade. OD 60.3mm tube could also be chosed in heavy duty loading projects.

本网站由阿里云提供云计算及安全服务 Powered by CloudDream